Matica ILM LS / DS - International Plastic Card Corporation

Matica ILM-LS/ILM-DS Inline Lamination Module

Matica ILM-LS/DS Inline Lamination Module Key strengths

Matica ILM-LS/ILM-DS Inline Lamination Module

Responding to the growing demand for durable and secure, tamper-resistant cards, we have developed the most flexible and fastest lamination program on the market. The EDIsecure® Inline Lamination Modules help to meet the demanding needs of applications such as secure employee and visitor card, driving license or national ID. The compact EDIsecure® Inline Lamination Module ILM-LS offers an enormous flexibility to accommodate total cost, throughput requirements, and reliability. With applying EDIsecure® clear and secure laminates on the card, which includes patches with chip cut-out, the surface will be protected against physical damage and the card life extended. Custom design or generic holographic foils help to protect the cards against tampering. Due to the portrait mode lamination a very high lamination speed of 16 seconds per card (single side) can be achieved.

The ILM-LS can be combined easily for inline lamination with the EDIsecure® XID 8300 Retransfer Printer, simply attach the unit with the appropriate joining plate to the printer – that’s it. Communicating via infrared interface, the lamination parameters for the various card materials are controlled by the printer driver. This allows the use of the laminator with all card materials, including PVC, Composite PVC, ABS, PET, and even Polycarbonate for longest card life. The laminator has a Kensington lock as well as an electronic security lock for the front door to secure the access to the supplies.

The laminator is also available as ILM-DS for simultaneous dual side lamination. Equipped with two lamination cartridges and separate temperature control of the upper and lower heat roller, even diffe-rent laminates can be applied to the card at the same time. A special version of the ILM-DS can be combined with the EDIsecure® DCP 360+ Direct Card Printer and XID 93xx Retransfer Printers.

  • Lamination Method: Thermal transfer

  • Lamination Mode: Single-sided with ILM-LS.  Double-sided (simultaneously) with ILM-DS

  • Lamination Speed: 16 – 30* seconds per card (single- or double-sided)

  • Speed Settings: 3 mm/s – 12 mm/s

  • Temperature Settings: 90°C – 180°C adjustable in 5°C steps

  • Card Materials: PVC, Composite PVC, ABS, PET and Polycarbonate Cards of ISO ID -1/CR-80 size, 85.60 x 53.98 mm

  • Card Thickness: 0.76 mm

  • Dimensions: 210 x 326 x 360 mm (WxDxH)

  • Weight: ILM-LS: 8.1 kg.   ILM-DS: 9.0 kg

  • Power Supply: 100/120 V and 220/240 V, 50/60 Hz, GOST-R, CE and UL approved

  • Operating Environment: 15°C to 30°C, 35% to 70% noncondensing humidity